Replacement Roofs

Getting the right roof on your building is an important decision and we want to help you make the right one

Getting the right roof on your building is an important decision and we want to help you make the right one. Our team of specialists are available are able to talk you through the different types of roofing options and help you make the right decision.

When it comes to panels we have six different options.

  • BattenLok® HS (Side Lap Mechanically Seamed)
  • Double-Lok®
  • Ultra-Dek®(Standing Seam Snap Down Roof Panel)
  • PBR Panel
  • SuperLok® (Side Lap Mechanically Seamed)
  • LokSeam®
  • You can read more below or download the more extensive PDF file.

    Download the PDF

    BattenLok® HS (Side Lap Mechanically Seamed)

    A unique feature of this panel is a vertical leg that is a side joint that is mechanically seamed with an electric seamer for a weather tight finish. This panel features concealed clips and easy to handle 16” wide panels custom cut to the desired length. This panel can be installed directly over purlins or bar joists. It does not require a solid substructure for support. This roof system has several different UL90 construction numbers.

  • Gauge: 24 (Standard) with 22 gauge available on request
  • Lengths: Maximum 55′ is standard. Other lengths are available as special request.
  • Dimensions: 16″ wide by 2″ high is standard. Other widths are available as special order.
  • Panel Attachment A choice of concealed fastening clips is available for this panel system including UL rated clips. These clips hold the panel firmly in place without unsightly exposed fasteners. Low and High clips are available which are fixed or floating. Floating clips accommodate Thermal Movement.
  • Finish: Galvalume Plus® and Architectural Series Usage: This panel is a structural panel that spans up to five feet on purlins, or can be used as an architectural panel over solid deck. This flat part of the panel is designed with striations or striations with pencil ribs as an option to minimize oil canning. It is in compliance with many industry codes.
  • Limitations: Recommended for roof slopes of ¼:12 or greater. Oil canning is not a reason for rejection.
  • Double-Lok®

    A metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. This panel design provides a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift).

  • Gauge: 24 (Standard) with 22 gauge available on request
  • Lengths: 55′ maximum is standard but longer lengths available by special request.
  • Fasteners: Concealed fastening system with floating clips. The clips are available as floating or fixed. Two different clip heights are available to allow for insulation.
  • Finish: Galvalume Plus® and Architectural Series
  • Usage: New and retrofit applications.
  • Limitations: Recommended for roof slopes of ¼:12 or greater. When using the fixed clip we recommend for double slope buildings 200′ wide or less and single slope buildings 100′ wide or less. (May vary upon extreme weather conditions.) Oil canning is not a reason for rejection.
  • Ultra-Dek®(Standing Seam Snap Down Roof Panel)

    A metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. This panel design provides a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift).

  • Gauge: 24 (Standard) with 22 gauge available on request
  • Lengths: 55′ maximum is standard but longer lengths available by special request.
  • Fasteners: Concealed fastening system with floating clips. The clips are available as floating or fixed. Two different clip heights are available to allow for insulation.
  • Finish: Galvalume Plus® and Architectural Series
  • Usage: New and retrofit applications.
  • Limitations: Recommended for roof slopes of ¼:12 or greater. When using the fixed clip we recommend for double slope buildings 200′ wide or less and single slope buildings 100′ wide or less. (May vary upon extreme weather conditions.) Oil canning is not a reason for rejection.
  • PBR Panel

    This panel is used both for the roof and walls. The PBR panel’s deep ribs create an even-shadowed appearance. The area between the ribs is reinforced.

  • Gauge: 26, 24 and 22
  • Lengths: 45′ maximum is standard but longer lengths available by special request.
  • Fasteners: Standard coated, CAD plated or zinc-aluminum cast head screw
  • Dimensions: 36″ coverage x 1 ¼” deep.
  • Finish: Galvalume Plus® and Commercial – Industrial Series
  • Usage: Roof, wall, liner, mansard, and soffit panel applications.
  • Limitations: ½:12 pitch or greater. Not designed for coverage over bar joist.
  • SuperLok® (Side Lap Mechanically Seamed)

    The SuperLok® standing seam roof system blends the aesthetics of an architectural panel with the strength of a structural panel. This panel has earned uplift ratings that are the highest in the industry for standing seam roofs, assuring the reliability of performance. This panel is Factory Mutual approved to satisfy stringent code requirements and is ICBO approved.

  • Gauge: 24 (Standard) with 22 gauge available on request
  • Finish: Galvalume Plus® and Architectural Series
  • Lengths: Recommended 55′-0″ maximum.
  • Fasteners: Concealed fastening system. A choice of concealed fastening clips are available for this panel system including UL rated clips. These clips hold the panels firmly in place without unsightly exposed fasteners. Each clip system offers the ability to accommodate thermal movement.
  • Dimensions: 12″, or 16″ wide and 2″ high
  • Usage: SuperLok® is a field seamed panel that combines a slim rib with exceptional uplift resistance. This panel has been designed to withstand the most rigorous conditions. This system was designed to be installed over open framing, ???” plywood, or a composite roof assembly.
  • Limitation: Recommended for roof slopes of ½:12 or greater. Oil Canning is not a reason for rejection.
  • LokSeam®

    LokSeam® is a snap-together standing seam roof system with a 1 3/4” tall vertical rib, for use on roofs with a minimum slope of 3:12. LokSeam® panels are available in 12-inch, 16-inch and 18-inch widths. LokSeam® panels can be installed over open framing or a solid substructure and are capable of transitioning from roof to fascia with the use of a rib cover. LokSeam® does not require a solid substructure for support.

  • Gauge: 24 (standard); 22 (12”, 16”, 18”), 26 (12”) (optional)
  • Finish: Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
  • Fasteners: Striated (standard); Embossed Striated (optional)
  • Dimensions: 12”, 16”, 18” widths.
  • Usage: Architectural roof and fascia applications.